Personal robotics project · since Oct 2026

Tishtar

A four-wheeled autonomous mobile robot, built from scratch. One subsystem at a time: actuation, sensing, state estimation, navigation.

phase
02/07
milestones
5/40
middleware
ROS 2

01 / Roadmap

From first motor to autonomy

  1. 01

    started

    Foundation

    Motor PWM, power distribution and toolchains.

    2 of 6 milestones completed

  2. 02

    ● now

    Camera & Pan-Tilt

    Image capture and a two-axis servo gaze.

    3 of 7 milestones completed

    next → Calibrate servo limits, then bring pan-tilt control into ROS 2.

  3. 03

    planned

    Motion Control

    Velocity commands, encoders, odometry and PID.

    0 of 6 milestones completed

  4. 04

    planned

    Perception

    LiDAR, IMU, ultrasonic and camera in ROS 2.

    0 of 6 milestones completed

  5. 05

    planned

    Localization & Mapping

    TF tree, odometry–IMU fusion and SLAM.

    0 of 5 milestones completed

  6. 06

    planned

    Navigation

    Path planning, obstacle avoidance, goal reaching.

    0 of 5 milestones completed

  7. 07

    planned

    Intelligent Behaviour

    Active perception and learned world models.

    0 of 5 milestones completed

done in progress planned One mark per milestone. Status reviewed 2026-11-16; bench results are self-reported. Issues ↗

02 / System

Architecture

High-level reasoning on the Raspberry Pi; real-time control on the STM32.

Tishtar system architectureA development PC talks to a Raspberry Pi 4B over ROS 2 (planned). The Pi talks to an STM32 over a serial link (planned). Camera capture over CSI, the PCA9685 servo controller over I2C, and STM32 PWM motor control are bench-tested. LiDAR, IMU and ultrasonic sensors are planned. ROS 2 serial CSI I²C 0x40 PWM Dev PCubuntu · rviz Raspberry Pi 4Bros2 · perception STM32 F446REreal-time control Range & inertiallidar · imu · sonar Cameraimx219 PCA9685pan · tilt servos Drivedc motors · encoders
bench-tested planned Logical view, not a wiring diagram.

03 / Build log

From the workbench

$ tail -n 6 ~/tishtar/build.log
[2026-10-27] repository repository and directory layout published (issue #1)
[··········] motor      first DC motor driven by STM32 timer PWM
[··········] camera     first frame from Pi Camera v2.1 (IMX219) on Ubuntu
[··········] assembly   two-axis pan-tilt assembled, camera mounted
[··········] controller PCA9685 found on I2C at 0x40
[··········] servo      pan (ch 1) and tilt (ch 0) driven from the keyboard
$ 

Undated entries follow build order. Dates are added once verified.

Follow the build

Code, issues and hardware notes are public.

tishtar-robot